System information

Integrate Polycom® DMATM Systems with UNIFY® OpenScape®

Integrate Polycom

DMA

Systems with

UNIFY

OpenScape

This chapter provides an overview of how to set up and configure Polycom

Distributed Media Application

systems to interoperate with UNIFY OpenScape

products. For more detailed information about

configuring DMA systems, refer to the documentation on the Polycom Support site.

Polycom DMA systems running software version 5.0 and later can place and receive calls with UNIFY

OpenScape Desktop Client PE version 6 and OpenScape Desktop Client WE version 6 with UNIFY

OpenScape Voice version 6.

Configure the Polycom DMA System SIP

Settings

This section shows you how to configure the DMA SIP system properties when setting them up to

interoperate in a UNIFY OpenScape environment.

To configure Polycom DMA Signaling Configuration properties:

1 Launch your web browser and enter the IP Address of your DMA System, for example,

http://10.1.1.24 .

2 If your PC’s firewall settings cause a security dialog to display, click on Continue to this website

(not recommended).

3 Type in the User ID (default is admin) and type in the Password (default is admin).

4 Select your Domain (default is LOCAL).

5 Go to Log in > Admin > Local Cluster > Signaling Settings, as shown next.