System information

Integrate Polycom RMX Systems with UNIFY OpenScape
Polycom, Inc. 86
 Telepresence Mode The field value indicates whether the system is licensed to work with
RPX and TPX Telepresence room systems. You can choose True or False.
 Serial Number This field displays the serial number of the RealPresence Collaboration Server
(RMX) system.
 Multiple Services A Multiple Services license is installed.
 HD If you are using the RealPresence Collaboration Server (RMX) 1500 with an MPMx-Q
media card, you will need an additional license if you want to use HD with Continuous
Presence.
 Polycom Partners The field value indicates that the system software contains features for the
support of specific Polycom Partner environments.
 Memory Size (MB) This field indicates the RealPresence Collaboration Server (RMX) system
memory size in MBytes. Specify one of the following values:
 1024 MB Version 7.1 requires 1024 Mbytes of memory.
 500 MB If memory size is 512MB, Version 7.1 is not supported.
 2048 MB Specify this memory size when using the RealPresence Collaboration Server
(RMX) 4000.
 Card Configuration Mode Indicates the MCU configuration as derived from the installed
media cards:
 MPM+ Only MPM+ cards are supported. MPMx cards in the system are disabled.
 MPMx Only MPMx cards are supported. MPM+ cards in the system are disabled.
Notes on Card Configuration Mode:
 When you start with Version 7.8 installed, the RealPresence Collaboration Server (RMX)
system enters MPMx mode by default, even if no media cards are installed.
 The RealPresence Collaboration Server (RMX) system switches between MPM+ and MPMx
Card Configuration Modes only if MPM+ or MPMx cards are removed or swapped while the
RealPresence Collaboration Server (RMX) is powered on.
 The Card Configuration Mode switch occurs during the next restart.
 Installing or swapping MPM+ or MPMx cards while the RealPresence Collaboration Server
(RMX) system is off will not cause a mode switch when the system is restarted. The
RealPresence Collaboration Server (RMX) starts in the Card Configuration Mode that was
active previous to powering down.