System information

Integrate Polycom RMX Systems with UNIFY OpenScape
Polycom, Inc. 83
To Use IPv6 Network Addresses for
RealPresence Collaboration Server
(RMX)Internal and External Entities
Not all IPv6 settings are available. You can assign the following IPv6 addresses to RealPresence
Collaboration Server (RMX) (Internal) and External Entity addresses.
RealPresence Collaboration Server (RMX) Internal Addresses
Default Management Network Service
 Control Unit
 Signaling Host
 Shelf Management
 MPM1 (Media Card)
 MPM2 (Media Card)
External Entities
 Gatekeepers (Primary & Secondary)
 SIP Proxies
 DNS Servers
 Default Router
 Defined participants
IPv6 Guidelines
The following is a list of guidelines when using IPv6:
 You must use Internet Explorer 7 to connect the RealPresence Collaboration Server (RMX) Web
Client and RealPresence Collaboration Server (RMX) Manager to the RealPresence Collaboration
Server (RMX) system using IPv6.
 IPv6 is supported with MPM+ and MPMx media cards only.
 The default IP address version is IPv4.
 You can define the IP address field in the address book entry for a defined participant as either
IPv4 or IPv6. You cannot add a participant with an IPv4 address to an ongoing conference while
the RealPresence Collaboration Server (RMX) system is in IPv6 mode nor can you add a
participant with an IPv6 address while the RealPresence Collaboration Server (RMX) system is in
IPv4 mode.
 Participants that do not use the same IP address version as the RealPresence Collaboration
Server (RMX) system in ongoing conferences launched from Meeting Rooms, Reservations and
Conference Templates are disconnected. An error message, Bad IP address version, is displayed.