System information

Integrate Polycom RMX Systems with UNIFY OpenScape
Polycom, Inc. 76
Modify Ethernet Settings
When using the RealPresence Collaboration Server (RMX) 1500/4000 platforms, you can manually
modify the automatically identified speed and transmit/receive mode of each LAN port that the system
uses if the specific switch requires it in the Ethernet Settings dialog.
Admin Tip: RealPresence Collaboration Server (RMX) 1500 Dialog Port Numbers
and RealPresence Collaboration Server (RMX) 1500 MCU Port Numbers are
Different
The port numbers displayed on the RealPresence Collaboration Server (RMX) 1500
dialog do not reflect the physical port numbers that labeled on the RealPresence
Collaboration Server (RMX) 1500 MCU.
You will need to match the port type to the label on the back panel of the RealPresence Collaboration
Server (RMX) 1500 MCU. Use the following table to match the port type to the back panel label.
Table 4: Matching Port Type to Label on the RealPresence Collaboration Server (RMX)1500
Port Type
Label on MCU
1500
4000
Media
LAN 2
LAN 2
RTM LAN Card
Modem
Modem
LAN 1
RTM-IP 4000 Card
Management 1
MNG B
LAN 2
Signaling 1
MNG
LAN 3
ShM
Shelf
LAN 6
To modify the automatic LAN port configuration:
1 On the RealPresence Collaboration Server (RMX) menu, click Setup > Ethernet Settings, shown
next.