System information

Integrate Polycom RMX Systems with UNIFY OpenScape
Polycom, Inc. 63
 Signaling Host IP Address Enter the address you want IP endpoints to use when dialing in to
the MCU. Dial out calls from the RealPresence Collaboration Server (RMX) system are initiated
from this address. This address is used to register the RealPresence Collaboration Server
(RMX) system with a Gatekeeper or a SIP Proxy server.
 Media Card 1 Port 1 IP Address and Media Card 1 Port 2 IP Address (RealPresence
Collaboration Server (RMX) 4000) If only one network is connected to this media card, it is
enough to assign one media card to this Network Service. In such a case, enter one IP address
for the media card according to the LAN Port used for the connection.
If each of the LAN ports on one media card is used with two different networks, each port is
assigned to its own Network Service. In such a case, enter the IP address of the port to be
assigned to this Network Service.
A LAN port that is already assigned to a different Network Service, displays the IP Address of
the assigned port and it cannot be assigned to this Network Service (it is disabled).
 Media Card 2 Port 1 IP Address (RealPresence Collaboration Server (RMX) 2000/4000)
and Media Card 2 Port 2 IP Address (RealPresence Collaboration Server (RMX)4000) Enter
the IP address(es) of the media card(s) as provided by the network administrator:
 RealPresence Collaboration Server (RMX): MPMx 1
 RealPresence Collaboration Server (RMX) 2000: MPM+/MPMx 1 and MPM+/MPMx 2 (if
installed)
 RealPresence Collaboration Server (RMX) 4000: MPM+/MPMx 1, MPM+/MPMx 2 (if installed),
MPM+/MPMx 32 (if installed) and MPM+/MPMx 4 (if installed)
The media card uses these addresses to connect to conferences and transmit call media, including
video, voice, and content.
 Subnet Mask Enter the subnet mask of the MCU. The default value is 255.255.255.0.
Configure the RealPresence Collaboration
Server (RMX) Routers
This section shows you how to configure router settings for the RealPresence Collaboration Server
(RMX).
Configure the router settings:
1 In the RealPresence Collaboration Server (RMX) Management pane, click Routers.
The Routers settings display, shown next.