System information

Integrate Polycom RMX Systems with UNIFY OpenScape
Polycom, Inc. 57
 Shelf Management IP Address Enter an IPv4 or IPv6 IP address for the RealPresence
Collaboration Server (RMX) Shelf Management Server. The IPv4 address of the RealPresence
Collaboration Server (RMX) Shelf Management Server is used by the RealPresence
Collaboration Server (RMX) Web Client to monitor hardware. The IPv6 address of the
RealPresence Collaboration Server (RMX) Shelf Management Server is used by the
RealPresence Collaboration Server (RMX) Web Client to monitor hardware. Note that you must
use Internet Explorer 7 to connect to the RealPresence Collaboration Server (RMX) Web Client
to the RealPresence Collaboration Server (RMX) using IPv6.
Click the All button to display the IPv6 addresses as follows:
 Auto If selected, Site-Local and Global site addresses are displayed.
 Manual If selected, only the Manual site address is displayed.
 Subnet Mask Enter the subnet mask of the Control Unit. Note that this field is specific to IPv4
and is not displayed in IPv6 only mode.
4 Click Routers, shown next, and modify the following fields:
 Default Router IP Address Enter an IPv4 or IPv6 IP address for the default router. The
default router is used whenever the defined static routers are unable to route packets to their
destination. The default router is also used when host access is restricted to one default router.