System information

Integrate Polycom RMX Systems with UNIFY OpenScape
Polycom, Inc. 53
 MULTIPLE_SERVICES YES
This setting enables network separation and is only required if you use network separation.
 RMX2000_RTM_LAN YES
This flag enables network separation using RTM LAN card for media and is only required when you
use RTM LAN card.
 ALWAYS_FORWARD_DTMF_IN_GW_SESSION_TO_ISDN YES
This setting allows you to send DTMF tones through an IP-ISDN gateway call and is mandatory if
you use an IP-ISDN Gateway.
 SEND_SRTP_MKI NO
This setting is required and mandatory if you use TLS.
Create a Primary Management Network
The primary Management Network is used to control the RMX system, primarily through the
RealPresence Collaboration Server (RMX) Web Client application. The Management Network contains
the network parameters, such as the IP address of the Control Unit, that are needed to connect the
RealPresence Collaboration Server (RMX) and the RealPresence Collaboration Server (RMX) Web
Client. The IP address can be used by the administrator or service personnel to connect to the Control
Unit if the RealPresence Collaboration Server (RMX) system becomes corrupted or inaccessible.