System information

Integrating Polycom® HDX® Systems with UNIFY® OpenScape®
Polycom, Inc. 36
Enter the IP address and port using the following format:
<IP_Address>:<Port>
<IP_Address> can be an IPv4 address or a DNS hostname such as
servername.company.com:6050. Hostnames can resolve to IPv4 or IPv6 addresses.
Syntax Examples:
To use the default port for the protocol you have selected: 10.11.12.13
To specify a different TCP or UDP port: 10.11.12.13:5071
Enter an IPv6 address using the following format:
[<IPv6_Address>]:<Port>
An example of an IPv6 address is: [2001:db8:85a3::8a2e:370:7334]:8032:8033
Note: Cascaded multipoint is not supported in SIP calls.
Cascaded multipoint is not supported in SIP calls. For more information about SIP
compatibility issues, refer to the Release Notes for Polycom HDX Systems.
Specify H.323 Settings (Optional)
If your network uses a gatekeeper, you can choose to have the HDX system automatically register its
H.323 name and extension, enabling others to call the system by entering that H.323 name or extension
instead of the IP address. You can configure H.323 settings using the system user interface or the web
interface. This procedure shows you how to configure settings using the web interface.
To specify H.323 settings:
1 Do one of the following:
○ In the system interface, go to System > Administrator Settings > Network > IP > H.323
Settings.
The H.323 Settings display. Use to navigate multiple pages.