System information

Integrating Polycom® HDX® Systems with UNIFY® OpenScape®
Polycom, Inc. 31
2 On the LAN Properties screen, configure the following fields:
 IP Address (Ipv4)
○ IP Address
Specify how the system obtains an IP address. Choose one of the following options:
» Obtain IP address automatically Choose this option if the system obtains an IP address
from the DHCP server on the LAN.
» Enter IP address manually Choose this option if the IP address will not be assigned
automatically.
○ Use the Following IP Address
» If you chose to obtain an IP address automatically in the IP Address field, the IP address
displays currently assigned to the system displays in this field.
» If you selected Enter IP Address Manually, enter the IP address here.
○ Default Gateway This field displays the gateway currently assigned to the system. If the
system does not automatically obtain a gateway IP address, enter one here.
○ Subnet Mask This field displays the subnet mask currently assigned to the system. If the
system does not automatically obtain a subnet mask, enter one here.
 IP Address (IPv6)
○ IP Address Specify how the system obtains an IP address. Choose one of the following
options:
» Obtain IP address automatically Choose this option if the system gets an IP address
automatically. DHCP is not currently supported for IPv6. When you choose this setting, the
system uses Stateless Address Autoconfiguration (SLAAC) to obtain a global address,
unique local address (ULA), or site-local address using router advertisements. The network
routers also must be configured appropriately to provide the advertisement packets.
» Enter IP address manually Choose this option if the IP address will not be assigned
automatically.
» Off Choose this option to disable IPv6.
○ Link-Local Displays the IPv6 address used for local communication within a subnet.
○ Site-Local Displays the IPv6 address used for communication within the site or organization.
○ Global Address Displays the IPv6 internet address.
○ Default Gateway Displays the gateway currently assigned to the system. If the system does
not automatically obtain a gateway IP address, enter one here.
○ Host Name Indicates the system’s Domain Name System (DNS) name.
○ Domain Name Displays the domain name currently assigned to the system. If the system
does not automatically obtain a domain name, enter one here.
○ DNS Servers Displays the DNS servers currently assigned to the system. If the system does
not automatically obtain a DNS server address, you can enter up to four DNS servers here.
» IPv6 You can specify IPv6 DNS server addresses for IP addresses entered manually or
obtained automatically (in the case of a system on a hybrid network that obtains IPv4 DNS
server addresses via DHCPv4).