Specifications

Phone Hardening Measures
A31003-D3000-P100-01-76A9, 10-2013
26 OpenStage and Desk Phone IP SIP V3, Security Checklist, Planning Guide
Secure Interfaces and Services to the Phone
Related Topics
4.6.5 Bluetooth Access
On OpenStage 60 and OpenStage 80 phones Bluetooth is available and allows
use of Bluetooth headsets or transfer of contact information (vcard).
• If Bluetooth is not used then it should be disabled
• If Bluetooth is enabled then the method of pairing can be set to be automatic
or needing a prompt. To ensure that the user is aware when another device
is paired with their phone and to prevent unauthorised pairing the pairing
method should be set to “prompt” and the pairing PIN must be set by the
user.?
• If Bluetooth is enabled then to reduce possibility of unauthorised pairing
attempts the discoverable parameter should only be set to YES by the user
when needed for pairing.
Table: SIP Secure Signalling
If CTI is allowed and Auto
Answer is not wanted or
used then set Auto
Answer to No
Yes: No:
Customer Comments and
Reasons. If some mea-
sures are not executed
then please explain here.
CL-Bluetooth
Measures • Disable Bluetooth if not used.
• If Bluetooth is enabled, inform user to set pairing mode to
prompt and the configure a pairing PIN.
• If Bluetooth is enabled, inform user to set Discoverable to
NO except when needed for setup of pairing.
References See Phone Administration Manual chapter on Bluetooth?.
See Phone User Guide chapter on Individual phone configu-
ration -> Bluetooth
Can be done via
Needed Access Rights Administrator, User
Executed
If Bluetooth is not needed
then disable in Admin me
Yes: No:
CL-SIP Secure Signal-
ling