Specifications

administration.fm
A31003-S2030-M100-10-76A9, 01/2014
OpenStage SIP V3R3 for OpenScape Voice, Administration Manual
79
Administration
IP Network Parameters
Data required
• DLS address: IP address or hostname of the server on which the Deployment Service is
running.
• DLS port: Port on which the DLS Deployment Service is listening.
Default: 18443
• Contact gap: The parameter is not used.
• Revert to default security: When set, security mode will be set to default. When using
local phone administration, this will be set by selection option ’Default security’ after
pressing Save&exit.
• Mode: Shows whether the communication between the phone and the DLS is secure.
Value range: "Default", "Secure", "Secure PIN"
This parameter is read-only.
• Security PIN : Used for enhanced security.
Administration via WBM
Network > Update Service (DLS)
Administration via Local Phone
|
--- Admin
|
--- Network
|
--- Update Service (DLS)
|--- DLS address
|--- DLS port
|--- Contact gap
|--- Mode
|
--- Security PIN
DLS port
Contact gap
Revert to default security
Mode
Security PIN
Update Service (DLS)
300
DLS address
192.168.1.242
Submit
Reset
18443
Default