Specifications

A31003-D3000-M100-02-76A9, 11-2013
OpenScape Desk Phone IP V3R3, Phone Administration, Administrator Documentation 183
Administration
Multiline Appearance/Keyset
reconnect to the remote phone by pressing the line key that corresponds to that
call, or 2) to initiate another call from the newly selected line. If "release" is
selected, the previously established call is ended.
If Show Focus is checked, the LED of a line key flutters when the line is in use.
If it is not checked, the line key is lit steady when it is in use.
The Reservation timer sets the period after which the reservation of a line is
canceled. A line is automatically reserved for the keyset whenever the user has
selected a line for an outgoing call and hears a dial tone. The reservation of a line
is accomplished by the OpenScape Voice server, which notifies all the endpoints
sharing this line. If set to 0, the reservation timer is deactivated.
Forward indication activates or deactivates the indication of station forwarding,
i. e. the forwarding function of OpenScape Voice. If Forward indication is
activated and station forwarding is active for the corresponding line, the LED of
the line key blinks.
Preselect mode determines the phone’s behavior when a call is active, and
another call is ringing. If the parameter is set to "Single button", the user can
accept the call a single press on the line key. If it is set to "Preselection", the user
must first press the line key to select it and then press it a second time to accept
the call. In both cases, the options for a ringing call are presented to the user:
"Accept", "Reject", "Deflect".
Preselect timer is relevant if Preselect mode is set to "Preselection". The
parameter sets the timeout in seconds for the second key press that is required
to accept the call. After the timeout has expired, the call is no longer available.
When Bridging enabled (Admin > Features > Configuration) is activated, the
user may join into an existing call on a shared line by pressing the corresponding
line key. On key press, OpenScape Voice builds a server based conference from
the existing call parties and the user. If the call has already been in a server based
conference, the user is added to this conference.
INFO: When bridging shall be used, it is highly recommended to
configure the phone for a system based conference (see System-
Based Conference). This enables adding more users to a system
based conference that has been initiated by bridging.