User manual

TD 92929EN

20 December 2013 / Ver. B

User Manual

WL3 and WL3 Plus WLAN Handset

1. Introduction

This document describes features and settings of the WLAN Handset. The WLAN Handset is

feature-rich with color display, telephony, and messaging. It is designed to be used in

medium demanding environments such as hospital environments, but also in office

environments.

The handset is aimed at users that need to be reachable and that need mobile voice and

messaging features. This makes it ideal for applications where the user needs either one

way messaging or to be able to interact with other users. The color display enhances and

simplifies the use of the handset.

All procedures in this document are according to default programmed versions, but

additional functions and factory settings are also included as an attempt to cover all

functionality.

NOTE: Some functions are dependent on the PBX and protocol (H.323/SIP) versions, and

your

system does not support all functions described in this document. For more

information about your system, please contact the person (or department)

responsible for the system in your organization, or contact your supplier.

There are two versions of the WLAN Handset:

•WL3

• WL3 Plus with messaging and alarm functions.

NOTE: WL3 may be upgraded by license to use messaging.

Refer to the Data Sheet for a co

mplete list of licenses.

Read chapter 2. Safety and Regulatory Instructions on page 5 before using the WLAN

Handset.

For software download and parameter set up, refer to the Installation and Operation

Manual, Portable Device Manager, Windows version TD 92712EN, and the Configuration

Manual, WL3 WLAN Handset and WL3 Plus WLAN Handset, TD 92930EN.

1.1 Target Group

This document is targetted at personnel responsible for handling the administration and

distribution of handsets at the end customer site, or anyone interested in aquiring deeper

knowledge about the product. For example, a system administrator, or an end user.

1.2 Prerequisite

Before using the handset, the system administrator must register the handset in the PBX for

voice, and in the applicable WSG modules for messaging and the optional central

management.

Refer to the Configuration Manual, WL3 WLAN Handset and WL3 Plus WLAN Handset,

TD 92930EN.