User manual

TD 92929EN
20 December 2013 / Ver. B
User Manual
WL3 and WL3 Plus WLAN Handset
63
9. Menu Operation
9.8.3 In Charger Action
You can determine actions to be performed when
a handset is placed in the charger.
Switch the handset off
The handset can be switched off automatically when it is placed in the charger. When it is
removed
from the charger, it switches on again. When the handset is switched off in the
charger, the Owner ID of the handset is shown. This simplifies the identification of the
handset when, for example, charging it together with other handsets.
1 Enter the menu by pressing the “Menu” soft key.
2 Select “Connections”
in the menu.
3 Select “In charger”.
4 Select “Switch off”.
Turn the sound off
When the handset is placed in the charger, it will be
muted. When the handset is rem
oved
from the charger, the sound switches on again. When the handsets sound is off/muted in
the charger, the Owner ID of the handset is shown. This simplifies the identification of the
handset when, for example, charging it together with other handsets.
NOTE: If handset restrictions are enabled, t
he handse
t might not be switched off/muted
when placed in the charger.
1 Enter the menu by pressing the “Menu” soft key.
2 Select “Connections”
in the menu.
3 Select “In charger”.
4 Select “Sound off”.
Change profile
The handset can change profile automatically when it is placed in the charger (WL3 Plus
only). The
profile is changed back whe
n the handset is removed from the charger.
1 Enter the menu by pressing the “Menu” soft key.
2 Select “Connections”
in the menu.
3 Select “In charger”.
4 Select “Other actions”.
5 Select “Change profile”.
6Press “Edit”.
7 Select a profile.
Deactivate the In charger action
1 Enter the menu by pressing the “Menu” soft key.
2 Select “Connections”
in the menu.
3 Select “In charger”.
4 Select “No action”.