User manual

TD 92929EN
20 December 2013 / Ver. B
User Manual
WL3 and WL3 Plus WLAN Handset
62
9. Menu Operation
To activate the Man-down and No-movement alarms:
1 From the Settings menu, select Alarm.
2 Select the wanted alarm(s) and press Back repeatedly.
The corresponding icon(s) appear on the display.
Follow the same steps to deactiva
te the alarm(s).
Edit Alarm Data
Info
rmation (for example a handset’s location) can be sent along with an alarm. It is
recommended to create
a shortcut for quick access to the “Edit alarm data“ menu, see 9.6
Short Cuts on page 53.
1 Enter the menu by pressing “Menu“.
2 Select
in the menu.
3 Select “Alarm“.
4 Select “Edit alarm data“.
5 Enter alarm data.
6 Press “Save“.
9.8 Connections
9.8.1 Headset
To achieve optimal audio quality with the different headset types, it is recomme
nded to
select the corresponding headset profile.
The default setting is microphone on a boom, that is, the audio is optimized for using a
headset with microphone on a boom. The headset profile can be changed in the menu as
follows:
1 Enter the menu by pressing the “Menu” soft key, or Confirmation on the Navigation
key.
2
Select “Connections”
.
3 Select “Headset” with the soft-key Select or Confirm
ation on the Navigation key.
4 Select the corresponding headset profile from list, that
is, “Mic on boom”, “Mic on
cable”, “Hearing protection”, or “Customized headset profile”
1
5 Press “Select”, or the confirmation button on the Navigation key.
If the preconfigured headset profiles do not
match the headset in use, or the audio
performance is bad, an own headset profile can be configured. This is done in the Device
Manager, refer to the Configuration Manual, WL3 WLAN Handset and WL3 Plus WLAN
HandsetTD 92930EN. If an own profile is configured in the Device Manager, the profile is
selectable in the handset menu.
9.8.2 Network
1 Enter the menu by pressing the “Menu” soft key.
2 Select “Connections”
in the menu.
3 Select “Network”.
4 Select network in the list. The handset
r
estarts if the network is changed.
1. Available if the headset profile has been configured in the Device Manager.