User manual

TD 92929EN
20 December 2013 / Ver. B
User Manual
WL3 and WL3 Plus WLAN Handset
57
9. Menu Operation
4 Select “Automatic key lock”.
5 Select “Off” for deactivation of
automatic key lock.
Activate the Phone Lock
The handset can be protected for unauthorized use. If this function is a
ctivated, a PIN code
has to be entered at power on, or when the handset is placed in a charger. This behavior is
activated when the handset is placed in the charger. The default phone lock code (0000)
can be changed to any 4–8 digit personalized code.
You can change the time for activation of this lock (default 20 seconds), see Automatic lock
time on page 58.
NOTE: Any one of up to five emergency numbers can
be
called while the handset is locked, if
configured in the WinPDM/Device Manager. See the Configuration Manual for the
handset.
1Press “Menu”.
2 Select “Settings”
in the menu.
3 Select “Locks”.
4 Select “Phone lock”.
5 Select “Auto phone lock”.
6 Select “On”, or “On in charger”.
7Enter PIN code
8Press “OK”.
If a user forgets the PIN code, it can be reset by the distributor.
Deactivate the Phone Lock
1Press “Menu”.
2 Select “Settings”
in the menu.
3 Select “Locks”.
4 Select “Auto phone lock”.
5 Select “Off”.
6Enter PIN code
7Press “OK”.
If a user forgets the PIN code, it can be reset by the distributor.
Change PIN Code
1Press “Menu”.
2 Select “Settings”
in the menu.
3 Select “Locks”.
4 Select “Phone lock”.
5 Select “Change PIN code”.
6 Enter the old PIN code.
7Press “OK”.
8 Enter the new PIN code.
9 Change field by using Down on the Navigation key
and ente
r the new PIN code again.