User manual

TD 92929EN
20 December 2013 / Ver. B
User Manual
WL3 and WL3 Plus WLAN Handset
55
9. Menu Operation
NOTE: If a handset restriction is enabled, it might not be possible to set the ring volume to
“Silent”, see the Configuration Manual for the handset.
Set different Ring Signals for Internal Call, External Call and Call Back
1Press “Menu”.
2 Select “Settings”
in the menu.
3 Select “Sound & Alerts”.
4 Select “Ring signals”.
5 Different signals for internal calls, external
call
s, and call back can be set. Select
“Internal call”, “External call”, or “Callback”. The handset has 15 different ring signals.
6 Select sound using “Select”. By pr
essing “Play”, you can listen to the different
sounds. Use “Stop” to stop listening.
7 Press “Back”.
Set Alert for Messages
1Press “Menu”.
2 Select “Settings”
in the menu.
3 Select “Sound & Alerts”.
4 Select “Message alert”.
5 Select between 10 different message alerts fr
om li
st. By pressing “Play”, you can
listen to the different alerts.
NOTE: The “Play” soft key is not available for Enhanced beeps. Instead
, send a message to
the handset to listen to the sound.
6 Press “Back”.
TIP: By default, the message volu
me follows the ring volume setting, but you can set a
different message volume in the handset, see the Configuration Manual, WL3 WLAN
Handset and WL3 Plus WLAN Handset, TD 92930EN.
Turn the Vibrator on/off
1Press “Menu”.
2 Select “Settings”
in the menu.
3 Select “Sound & Alerts”.
4 Select “Vibrating alert”.
5 Select “On”, “On if silent” (that is, the vibrator is on wh
en the
handset is muted), or
“Off”
6 Press “Back”.
Set the Key Sound
This means that every time a key is used, the handset produces a small sound.
1P
ress “Menu”.
2 Select “Settings”
in the menu.
3 Select “Sound & Alerts”.
4 Select “Key sound”.