User manual

TD 92929EN
20 December 2013 / Ver. B
User Manual
WL3 and WL3 Plus WLAN Handset
48
9. Menu Operation
6 Select profile from list and change profile as wanted.
Activate Profile
1Press “Menu”.
2 Select “Profiles”
in the menu.
3 Select profile from the list.
When a profile is activated, the icon
and the name of the profile is displayed in
idle mode.
Delete Profile
1 Enter “Menu”.
2 Select “Profiles”
in the menu.
3 Select profile from the list.
4 Press “More”.
5 Select “Delete” from menu.
6Press “Select”.
7 Press “Yes” to confirm.
Edit Profile
1 Enter “Menu”.
2 Select “Profiles”
in the menu.
3 Select profile from the list.
4 Press “More” and then select “Edit”.
5 The following options can be performed:

- Edit the required setting by marking it, and then press “Edit”.
- Add additional settings by pressing “More” and then sel
e
ct “Add setting” or
“Import from”.
- Remove a setting by marking it and then select “More”
> “Remove setting”.
6 If needed, mark the added settings, and press “Edit” to ma
ke the changes.
9.4 Messaging
The following features are applicable to WL3 Messaging and WL3 PlusConfiguration Manual,
WL3 WLAN Handset and WL3 Plus WLAN HandsetTD 92930EN.
When a text message is received, the LED starts flashing and the message alert signal
sounds. The “New message” icon , and the content of the received message are
automatically displayed. The icon is displayed until all new messages are opened. If the
message is received during a call, a beep notifies the user.
The handset user can reply, forward the message, call the sender, and call number
1
included
in a text. It is also possible to read the message later by pressing “Close”. A received
message is stored in the Inbox. See Read a Stored Message on page 49.
The last thirty messages received are stored in the inbox. Time and date information is
included in the message.
1. The number must consist of minimum 3 digits.