User manual

TD 92929EN
20 December 2013 / Ver. B
User Manual
WL3 and WL3 Plus WLAN Handset
43
9. Menu Operation
5 Press “More”.
6 Select “Delete all”.
7 Select “Yes” to delete ALL entries from the Call list.
9.1.2 Missed Calls
NOTE: Also declined calls are counted as missed calls.
1 Enter the menu by pressing the “Menu” soft key.
2 Select “Calls”
in the menu.
3Press “Select”.
4 Select “Missed calls”.
5 Step with Up and Down to select number in the list.
6 Press “Call”, or
to call back.
As in the Call list, there is a Soft Key “More” which can be
used to view the time/date of the
call, edit the received number, add to contacts, delete received numbers. See 9.1.1 Call List
on page 41 for information about the functionality in Soft Key “More”.
NOTE: If supported by the system, the number’s c
o
ntact name can be displayed in the list.
9.1.3 Call Diversion
NOTE: This function is system-dependent. The parameters
are set up in the Device Manager,
refer to the Configuration Manual, WL3 WLAN Handset and WL3 Plus WLAN
HandsetTD 92930EN.
Divert All Calls
1 Enter the menu by pressing the “Menu” soft key.
2 Select “Calls”
in the menu.
3 Select “Call services”.
4 Select “Divert calls” > “Inte
r
nal” or “External”.
5 Select “All calls” > “Edit”.
6 Enter number (maximum 24 digits) to divert to.
7 Select “OK” or “Back” > “Yes”. The check box is marked.
8 Press “Back” until the screen turns to idle mode.
The handset sends a diversion reason code to the syst
em when establishing
a call. The call is
automatically disconnected after a few seconds.
9 To stop the diversion select “All calls” and unma
rk the check box. Press the Soft Key
“Back” until the screen turns to idle mode.
Divert Calls if No Reply
1 Enter the menu by pressing the “Menu” soft key.
2 Select “Calls”
in the menu.
3 Select “Call services”.
4 Select “Divert calls” > “Internal or External”.
5 Select “No reply” > “Edit”.
6 Enter number (maximum 24 digits) to divert to.