User manual

TD 92929EN
20 December 2013 / Ver. B
User Manual
WL3 and WL3 Plus WLAN Handset
39
7. Alarm Operation
Associated Access Point (AP) Location
This function is used together with an alarm. The AP com
municates to the handset where
the handset is located for the time being. This gives a fair indication of the location.
An approximate location of the handset is added to alarms sent from the handset. The
handset sends the current and previous AP location to indicate where the alarm was
activated.
Alarm with Data
The data can be defined and stored manually by the user. To use the function, one Soft/Hot
key/Navigation key in the handset must be defined as a shortcut to the menu “Edit alarm
data”, see 9.6 Short Cuts on page 53. The stored data is added to all types of alarms at
transmission.