User manual

TD 92929EN
20 December 2013 / Ver. B
User Manual
WL3 and WL3 Plus WLAN Handset
34
6. Calling
6.3.8 Conference Call
Prerequisite: A new call has been started during the conversat
ion, see 6.3.3 Start New Call
During Conversation on page 33. Invite a call to the conference as follows:
1 Step to the call on hold (indicated with
) with the five-way Navigation key. Press
“More” during the call.
2 Select “Conference”. Now the two dialed persons are in a conference call with the
p
erson who initiated the call. (An ongoing call is indicated with
).
The person initiating the conference call is the conference leader, and the o
ther persons are
participant members of the conference call.
If desired, either of the persons in the ongoing conference call can be put on hold by the
conference leader, by selecting the soft key “Hold”. The person on hold is invited to the
conference call again, by selecting “More” and “Conference”. (“Retr.” toggels between the
two calls.)
TIP: The conference leader can return to idle mode and let the other two parties continue the
conversation by pressing the left soft key “Hold” for one call and then select the soft key
“More” and “Transfer to name”.
NOTE: If you already are involved in a secure co
nn
ection with a party when you initiate a
consultation call, the original party is placed on hold. The new consultation connection
can either be secure or non-secure. The entire conference is non-secure if any
connection is non-secure. The relevant icon appears on each of the handset displays,
see 6.1.1 Answer a Call on page 30.
6.3.9 Hold Call
1 Press the soft key “More” during the call.
2 Select “Hold” to put the call on hold.
To retrieve the held call:
1 Press the left soft key “Retr.”.
6.3.10 Call Back
When a call is made to a busy handset, it is possible to automa
tically call back when the
busy handset is free. Do as follows:
1 When a busy tone sounds, “User busy. Order call
back” and the soft keys “Yes” and
“No” are displayed.
2 Select “Yes” if it is desired to call the person back au
tomatically.
3 When the handset alerts, press
and the call is automatically started.
6.3.11 Call Waiting
During an ongoing conversation, when a short two-b
eep tone sounds and the Incoming call
dialog window appears, do as follows:
1 Press “Accept” to answer the other call (the first call is put on hold), or pre
ss
“Decline” to reject the call (which is indicated as missed call).
The call on hold is indicated with
, and the ongoing call is indicated with . Use
the soft key “Retr.” to switch between the calls.