User manual

TD 92929EN
20 December 2013 / Ver. B
User Manual
WL3 and WL3 Plus WLAN Handset
33
6. Calling
3Press “Select”.
It also possible to turn the microphone off/on by a long press on or
.
6.3.3 Start New Call During Conversation
NOTE: If configured in the Device Manager, it is possible to make an emergency call while the
ha
ndset/keypad is locked. During the ongoing emergency call, the soft key “More” is
disabled.
1 Press “More” during the call.
2 Select “New Call”. The first call is automa
tically put on hold.
3Press “Select”.
4 Enter the number or pr press
to access the phonebook.
5Press
, or “Call”.
6.3.4 Switch Between Calls
To switch between two ongoing calls:
1 Select the call on hold using the Navigation key.
2 Press the left soft key “Retr.”.
The retrieved call is
in
dicated with . The call on hold is indicated with .
6.3.5 End Call
Prerequisite: A new call has been started during the conversat
ion, see 6.3.3 Start New Call
During Conversation on page 33.
1 Select the call to end by using Up an
d Down on the Navigation key.
2 Press the right soft key “End”. The selected call ends.
3 If needed, press the left soft key “Retr.” to re
sume
the remaining call.
6.3.6 Transfer Call
Prerequisite: There are two ongoing calls.
1 Select the call on hold using Up and Down on the Navigation key.
2 Press “More”.
3 Select “Transfer to”. The two calls are connected. “Transferred” is displaye
d and
the
handset enters idle mode.
6.3.7 Transfer to New Call
Prerequisite: There is one on
going call.
1 Press “More” during the call.
2 Select “Transf. to new”.
3Press “Select”.
4 Enter the number to which the other party will be connected. It is also possible to
ma
ke a
phonebook lookup
to select a contact in the local phonebook and the
company phonebook.
5Press “OK” or
to transfer the call.