User manual

TD 92929EN
20 December 2013 / Ver. B
User Manual
WL3 and WL3 Plus WLAN Handset
31
6. Calling
NOTE: The + character cannot be entered and international numbers cannot de dialed this
way, if the 0 key has been configured as a hot key, see 9.6.2 Define Hot Keys on page
53.
6.2.2 Dial Using a Pre-Programmed Key/Button
Some keys and buttons can be programme
d with a number, as described in 9.6 Short
Cuts
on page 53.
Press the pre-programmed key/button to dial the number. The call is automatically
connected.
6.2.3 Dial a Number from the Call List
NOTE: It is also possible to dial a number from
the Call list by pressing the Call key
,
selecting a number from the list, and then pressing “Call” or the Call key
.
1Press “Menu”.
2 Select “Calls”
.
3 Select “Call list”.
4 Select a number.
5Press
or the soft key “Call” to dial. The number can be edited before the call is
dialed. Press “More” and select “Edit number”. The 25 last received, dialed, or missed
calls are stored in a call list. See 5.1 Calls on pa
ge 21.
6.2.4 Dial the Sender of a Message
1
It is possible to call the sender of a message stored in the message list.
1 Open the menu by pressing the “Menu” soft key.
2 Select “Messaging”
.
3 Select “Inbox”.
4 Select message in the mess
age li
st.
5Press “View”.
6 Press “More”.
7 Select “Call sender”.
6.2.5 Dial a Number from the Local Phonebook
1 Open the menu by pressing the “Menu” soft key.
2 Select “Contacts”
.
3 Select “Call contact”.
4 Select contact from the list, or search name/
n
umber by entering characters in the
search field.
5 Press “Call” or
to make the call.
TIP: Use the Navigation key Down in the Idle mo
de to open the local phonebook.
6.2.6 Dial a Number from the Company Phonebook
1 Open the menu by pressing the “Menu” soft key.
1. Applicable to WL3 Messaging and WL3 Plus only.