User manual

TD 92929EN
20 December 2013 / Ver. B
User Manual
WL3 and WL3 Plus WLAN Handset
20
4. Basic Operation
2Press “Lock”.
Unlock Keypad
1Press
.
2 Press “Yes”.
NOTE: An incoming call can be answered and the alarm button can be pressed while
the
keypad is locked. If configured in the WinPDM/Device Manager, an emergency call can
also be made while the keypad is locked. See the Configuration Manual, WL3 WLAN
Handset and WL3 Plus WLAN Handset, TD 92930EN.
4.6 Lock and Unlock the Handset
The handset can be locked to prevent unauthorized use. If this function is activated, a PIN
code has to be entered, for example, to switch on the handset, to answer an incoming call
etc. The default phone lock code (0000) can be changed to any 4–8 digit personalized code.
1Press “Menu”.
2 Select “Settings”
.
3 Select “Locks”.
4 Select “Phone lock”.
5 Select “Auto phone lock”.
6 Select “On”, “On in charger”, or “Off”.
7 Enter PIN code. If a user forgets the PIN code, it can be rese
t by the syste
m
administrator.
NOTE: Press “OK”. If a handset is shared and one
of the users logs off the shared phone, the
lock that prevents the handset from unauthorized use is deactivated. For additional
information, see 4.3 Log a Shared Phone On/Off on page 19.
NOTE: If configured in the WinPDM/Device Manager,
an em
ergency call can be made while
the handset is locked. See Configuration Manual, WL3 WLAN Handset and WL3 Plus
WLAN Handset, TD 92930EN.