User manual

TD 92929EN
20 December 2013 / Ver. B
User Manual
WL3 and WL3 Plus WLAN Handset
17
3. Description
IMPORTANT: Only use the power supply provided.
3.2.2 Rack Charger
The rack charger is used to charge up to six handsets at t
he same time.
Refer to the Installation and Operation Manual, CR3 Charging Rack, TD 92825EN.
3.2.3 Battery Pack Charger
The battery pack charger (CR4) is used to charge up to six spa
re batteries.
Refer to the Installation Guide, CR4 Battery Pack Charger, TD 92883EN.
3.2.4 Clip
NOTE: It is possible to use the handse
t without any attached clip, see 14.4 Attach Cover for
No Clip on page 72.
NOTE: The belt clips cannot be used if the handset is placed in a case. See 3.2.6 Leather
Casing on page 17 for more information.
There are two belt clips available:
• Hinge-type clip
To prevent the handset from slipping out of, for example, a pocket
or belt, see 15.
Troubleshooting on page 73.
•Swivel-type clip
To be able to rotate the handset without slippi
ng out from, for example, a pocket or belt,
see 14.3 Attach the Swivel-type Clip on page 72.
3.2.5 Security Cord
The security cord is 800 mm long. It is attached directly to the handset.
3.2.6 Leather Casing
The leather casing is specially designed for the han
dset. The casing comes with a swivel type
belt clip, and the handset is fully operational while it is placed in the casing.
3.2.7 Headset
A headset is recommended if the handset is frequently used and/or if the user wants to
have both hands free. The headset comes in three versions; microphone integrated in the
cable, or microphone on a boom, and hearing protection. It is also possible to use any
headset with a 2.5 mm connector and configure parameters for the headset using the user’s
headset profile.
To achieve optimal audio quality with the different headset types, it is recommended to
select the corresponding headset profile. See 9.8.1 Headset on page 62 for more
information.