User manual

TD 92929EN
20 December 2013 / Ver. B
User Manual
WL3 and WL3 Plus WLAN Handset
10
3. Description
3. Description
3.1 WLAN Handset
Figure 1.
1
2
3
4
5
6
7
8
9
10
11
13
14
15
16
17
18
12
The WLAN Handset.
1 Multifunction
a
/Alarm button
This button can be used as a short cut to functions. The button has two modes,
long mode or double press mode. In the WL3 Plus, the button is used as an alarm
push button only. See 9.6.4 Define Multifunction Button on page 54 and 7.1
Push-button Alarm on page 37.
2 Earpiece speaker
3 Volume button (up)
To increase the earpiece speaker, headset, and the loudspeaker volume.
4 Volume button (down)
To decrease the earpiece speaker, headset, and the loudspeaker volume.
5 Mute and PTT button
To turn on/off audible signals in standby mode, or silence the ring signal for an
incoming call. During a call, a long press on the button changes between
microphone on/off. This button has the same function as (13) Sound off key.
To open the microphone during a Push-to-Talk (PTT) group call. The microphone
is open as long as the button is depressed.
6Soft keys
The three Soft keys can be pre-programmed, see 9.6.1 Define Soft Keys on page
53, or used with the GUI. The function of each Soft key is indicated by text in the
display just above the keys.
7 Call key
To answer a call, to pre-dial a number, and used as a short cut to the Call list.