Specifications

TD 92442EN

04 October 2013 / Ver. PB1

Installation and Operation Manual

OpenStage WL3 Wireless Service

12. WLAN Interface

12.1 Handset Registration

To be able to register, each VoWiFi handset must be programmed with the IP address

of the WSG used, refer to the Configuration Manual for respective VoWiFi handset.

12.2 Shared Phones

When using shared phones all VoWiFi handsets authenticates with passwords. The

password can be a common password for all users or the call number.

12.3 WLAN System

WLAN system handles the VoWiFi handset relogin time and authentication. A handset

is considered to be logged out if it has not made a relogin within a certain time. Call

diversion display text, Extended activity logging are also enabled in this view.

To find settings for WLAN System, do as follows:

1 Click “Configuration” on the start page.

2 Select Other Settings > Advanced Configuration in the menu in the on the

Configuration page.

3 Select “WLAN System” under WLAN Interface in the menu in the on the

Advanced Configuration page.

• Handset relogin time

The time before a handset must relogin is set in minutes and when this time is

exceeded the handset will be considered unreachable. This is the maximum time it

takes for a handset to reconnect after installing a new or updating the WSG.



Note that a short relogin time implies a higher service/security but it also loads the

system.

• Call Diversion Display Text

Text specified in the “Call Diversion Display Text” text field is, if enabled, added to

the display text when a call diversion takes place. By entering the character “%”, the

original call ID will be included in the display text on the place where the character is

entered. Note that some characters are special characters that are not visible.

• Enable Extended Activity Log

Enable Extended Activity Log for intermediate logs, for more information see the

Function Description, Activity logging in Unite document.

• Authentication Method

The very first time a VoWiFi handset logs in, it must authenticate itself with a

password. The password is then stored in the handset for future authentication. The

WSG Server has two authentication alternatives; “Common password” and

“Number as password”.

• Common Password

A common password can be specified in the WSG, and this password is then used

for all VoWiFi handsets in the system. If the common password field is left empty,

the handset must send an empty password for authentication.

• Allow Force Login