Specifications

TD 92442EN
04 October 2013 / Ver. PB1
Installation and Operation Manual
OpenStage WL3 Wireless Service
76
11. Open Access Protocol (OAP)
11. Open Access Protocol (OAP)
This function makes it possible for customer applications to communicate with other
connected systems, for example the Cordless Telephone System. The protocol that is
used for communication is called Open Access Protocol (OAP).
Refer to the Function Description for Open Access Protocol (OAP) for more information
about the protocol and when it can be used.
11.1 Configuration
The Message Distribution lists for the different interfaces have to be configured to send
the information to the OAP Server, in order to give the client access to the information.
The address of the OAP Server is xxx.xxx.xxx.xxx/OAP.
Configuration Example
The WLAN Interface should be configured to send User Data to the OAP Server.
1 Click “Configuration” on the start page.
2 Select Other Settings > Advanced Configuration in the menu on the
Configuration page.
3 Under WLAN Interface, click “Message Distribution” in the menu on the
Advanced Configuration page.
4 Select “Alarm”.
5 Enter the address xxx.xxx.xxx.xxx/OAP in one of the address fields.
6 Click “Activate”.
11.2 Importing a new OA-XML file
It is possible to import new services, and update existing services, by importing a new
OA-XML file to the module. The OA-XML description and OA-XML schema documents
will also be updated when a new file is imported.
1 Select “OA-XML” in the menu on the System Setup page. The Import OA-XML
file opens.