Specifications

TD 92442EN
04 October 2013 / Ver. PB1
Installation and Operation Manual
OpenStage WL3 Wireless Service
74
9. Remote Management
1 Click “Configuration” on the start page.
2 Select Other > Advanced Configuration in the menu on the Configuration page.
3 Select “Remote Management” in the menu on the Advanced Configuration page.
4 In the Protocol Version drop-down list, select one of the following:
• Select protocol version 1.0 if a legacy RMC is connected, or if a RMC is not
connected through a VPN tunnel.
• Select protocol version 2.0 if a RMC is connected through a VPN tunnel. In
this case RMC version 1.32 or later must be used.
RMS
Serial IP Server
RMC
Module
RMS = Remote Management Server
RMC = Remote Management Client