Specifications

TD 92442EN
04 October 2013 / Ver. PB1
Installation and Operation Manual
OpenStage WL3 Wireless Service
73
9. Remote Management
For TCP, port 10101 has to be open.
2 Set up the port parameters.
3 Click “Activate”.
You will be prompt to confirm the change by pressing the mode button.
4 Press the mode button on the module.
5 Click “Activate” to save the changes.
6 Click the mode button to return to normal mode immediately or wait 10 minutes
for the module to return automatically. Any secured setting can be activated
within the 10 minutes period.
The module needs to be restarted for the changes to take effect.
Serial port channel
1 Click one of the “NOT USED” links for Serial port channel to set up a new
channel.
One serial port channel for each tool has to be set up. Web based configuration
tools do not require serial port channels.
2 Set up the channel and click “Activate”.
9.1 Serial IP Server Protocol
This parameter determines the version of Serial IP Server protocol to be used to
establish a serial port channel from the RMC to the Serial IP Server. The Serial IP
Server is a service that communicates with the WSG’s COM-ports.