Specifications

TD 92442EN
04 October 2013 / Ver. PB1
Installation and Operation Manual
OpenStage WL3 Wireless Service
72
9. Remote Management
9. Remote Management
A remote connection to a customer site can be established through the WSG. This
makes it possible to configure and maintain sites, independent of distance.
To be able to connect remotely, the remote management server in the module has to
be configured. The help text buttons in the GUI will give more information about each
parameter settings.
1 Click “Configuration” on the start page.
2 Select Other Settings > Advanced Configuration on the Configuration page.
3 Click “Remote Management” in the menu on the Advanced Configuration page
Remote connection
1 Click “Edit” for Remote Connection, to set up the connection parameters.
2 Set up the connection parameters.
3 Click “Activate”.
Open ports
1 Click “Edit” for Open Ports to open any additional ports that are needed for
configuration tools. This is a secured setting and before it can be activated it
must manually be confirmed by pressing the mode button on the module.