Specifications

TD 92442EN

04 October 2013 / Ver. PB1

Installation and Operation Manual

OpenStage WL3 Wireless Service

8. Additional System Settings

4 The following parameters can be set (some of these parameters can also be set

in the setup wizard):

• Time source – Where to fetch the time; A-bus, web browser or NTP server

• Time server address – IP address to NTP server

• Fault log – Create fault log for time server faults

• Time zone – Current time zone

• Auto DST adjust – Automatic adjustment for daylight saving time

• Date format – Which date format to use

• Date separator – Which character to use to separate the date fields

• Time Format – Which time format to use

• Time push time – When to update all interfaces within the module

5 Click “Activate”.

For additional information, see also the Installation Guide for your product.

8.3.1 Manual Time Setting (if Web browser is Time Source)

If Web browser has been selected as time source, the time must be set manually.

Otherwise this setting shall not be done. The setting can also be done in the setup

wizard.