Specifications

TD 92442EN
04 October 2013 / Ver. PB1
Installation and Operation Manual
OpenStage WL3 Wireless Service
67
8. Additional System Settings
1 To set Default Category, click “Default Category”.
2 Enter values for Messaging handler IP address and Messaging handler service
name. (Default service name is DGH which is the internal message group
handler.)
If you, for example, want to send messages to a WSG connected to a WLAN
system, enter the IP address of the module and set messaging handler to
WLAN.
3 Click “Activate”.
8.1.3 Alias / Call ID
Alias can be used when there are numbers that do not belong to the default category.
1 To set Alias, click “Alias / Call ID”.
Click one of the links.
2 Enter settings for UNS Alias / Call ID.
In this example, a message that is addressed to “MyAlias” will be sent to the
handset with extension 1234 in the WLAN system that is connected to the WSG
with the address 192.168.0.1.
3 Click “Activate”.