Specifications

TD 92442EN
04 October 2013 / Ver. PB1
Installation and Operation Manual
OpenStage WL3 Wireless Service
64
7. Device Configuration
7. Device Configuration
7.1 Device Management Setup
This setting determines which Device Handler interface the devices should logon to.
The Device Manager will then ask the interface for logged in devices, meaning that the
devices will appear in the Device Manager.
Figure 17. Example 1
In figure 17, the Device Manger is enabled in the WSG. In this case the WSG is
pointing to its local Device Handler interface meaning that the devices will logon to that
interface. The Device Manager asks the interface for logged in devices that will appear
in the Device Manager.
Figure 18. Example 2
In figure 18, the WSG A does not have a Device Manager enabled. In this case the
WSG A is pointing to the Device Handler interface in WSG B. All devices will logon to
that interface, and the Device Manager will ask the interface about logged in devices
that will appear in the Device Manager.
1 Click “Configuration” on the start page.
2 Select Other Settings > Advanced Configuration, on the Configuration page.
3 Click “Device Management”.
Figure 19. The Device Management page.
Device Manager
Device Handler
Interface
Module 10.30.1.1
“listening”
127.0.0.1
or
10.30.1.1
Device Manager
Device Handler
Interface
Device Manager
Device Handler
Interface
Module B 10.30.1.2
Module A 10.30.1.1
“listening”