Specifications

TD 92442EN

04 October 2013 / Ver. PB1

Installation and Operation Manual

OpenStage WL3 Wireless Service

6. Device Manager

2 Select the Parameter definition tab or Software tab and click “Add”.

3 Select the package file (.pkg) to be imported and click “Open”.

The files included in the package are now imported. If needed, select the Parameter

definition tab or Software tab to view the corresponding imported files (if any).

If template(s) has been imported, it can be viewed by clicking “Close“ and then

selecting the Template tab.

4 Click “Close”.

6.7.3 Import Parameter Definition Files

Updated parameter definition files are distributed by your supplier.

NOTE: Parameter definition files (.def) are mainly included in package files (.pkg)

distributed by your supplier, see

6.7.2 Import a Package File.

1 In the File menu, click “File management”. The File management window opens.

2 Click the Parameter definition tab.

3 Click “Add”. The Import files window opens.

4 Select the definition files to be imported.

Only files with a corresponding extension are shown, such as .def and .pkg.

5 Click “Open”.

6 Check that the newly imported definition files appear in the list.

7 Click “Close”.

If a definition file for a certain device type already exists in the database and an attempt

is made to import a definition file with the same parameter version but with a lower

revision, the file will not be imported. But if a new definition file with the same parameter

version with a higher revision is imported, the old file will be replaced with the new

imported file.

For each update of a parameter definition file, the revision is increased. An update

does not necessarily affect the parameter version.

The following columns are displayed:

• Device type – the device model.

• Revision – the revision number of the definition file. Used to determine which

definition file is the most recent.

• Parameter version – shows the version of the parameters in the definition file.

Used to determine compatibility with device software.

• File – the name of the imported definition file.

6.7.4 Import new Software for Devices

Updated software files are distributed by your supplier.

NOTE: Software files (.bin) are mainly included in package files (.pkg) distributed by

your supplier, see

6.7.2 Import a Package File on page 56.

1 In the File menu, click “File management”. The File management window opens.