Specifications

TD 92442EN

04 October 2013 / Ver. PB1

Installation and Operation Manual

OpenStage WL3 Wireless Service

6. Device Manager

6.7 File management

This chapter covers file management for parameter definition files, software files,

language files and company phonebook files.

Figure 16. The File Management Window

Import and export of templates and Numbers is described in 6.8 Import/Export

Numbers and Templates on page 62. Import of translation files is described in 14.1.4

Import Language File on page 84.

The parameter definition file holds the definitions of all parameters for a specific version

of a Number’s parameter set. Updated software and new parameter definition files for

devices and Numbers can be added to the Device Manager, see 6.7.3 Import

Parameter Definition Files on page 57 and 6.7.4 Import new Software for Devices on

page 57.

If there is a naming conflict when importing, a warning message is displayed.

6.7.1 Definition File Version – Parameter Version

Both definition files and device software include parameters and are indicated by a

version number.

NOTE: The version of the definition file matches the version of the device software.

If a device is updated with a new parameter version it does not always demand a new

definition file. An old definition file can often be used but if new parameters have been

added in the new parameter version, these parameters will not be editable. The release

note will tell you if a new definition file is needed to match the new parameters.

Example

If a parameter version for a Number is 2.5, then a parameter definition file with a

version between 2.0 and 2.5 is required.

6.7.2 Import a Package File

A package file may include different types of files, such as software files, parameter

definition files and/or template files. If the package does not include a certain file, it can

be imported separately. See 6.7.3 Import Parameter Definition Files on page 57, 6.7.4

Import new Software for Devices on page 57, and/or 6.8.2 Import Templates on page

62.

1 In the File menu, select “File management”.