Specifications

TD 92442EN

04 October 2013 / Ver. PB1

Installation and Operation Manual

OpenStage WL3 Wireless Service

6. Device Manager

3 Select the parameters you want to be saved in the template by selecting the

check box to the left of each parameter.

4 Change the parameters to the desired values.

5 Click “OK”.

6.3.2 Save a Device Configuration as a Template

It is possible to use an already configured device and save it as a template. The

template will contain configuration data and will not include contacts and other personal

data if it is a handset.

This template can be used as a backup if you later want to restore the configuration of

the device, or as a template to be applied on a number of devices.

1 Some parameters are user specific. If it is decided to apply this type of template

to several handsets, it is recommended to exclude the following parameters:

• Owner ID - A text string specified in standby mode. The parameter is located

directly under “Settings”.

• Phone lock PIN code - The security code used to unlock the keypad. The

parameter is located under Settings > Locks.

2 Open the Device Manager.

3 Select the Numbers tab and select the handset you want to save as a template.

4 Right-click and select “Use as a template...”. Enter a descriptive name for the

template.

5The Edit template window is opened. By default, all parameters are selected and

are saved when clicking “OK”.

If one or more parameters should be excluded, remove them by clearing the

check box next to the parameter.

6 Click “OK”.