Specifications

TD 92442EN
04 October 2013 / Ver. PB1
Installation and Operation Manual
OpenStage WL3 Wireless Service
37
6. Device Manager
Devices Tab
The Devices tab shows all devices configured at the site in a detailed list. The following
information can be displayed (see also figure 10 on page 35):
• Description – .optional information of a Number that can be added by the user. For
example, the user of the device.
• Device ID – the unique identifier of the device.
• Device type – the device model.
• Software version – shows the version of the software in the device.
• Parameter version – shows the version of the parameters in the Number.
• Upgrade status – might show one of the symbols shown in table 2 below.
• Online – shows if the device is connected to the Device Manager. The symbol
indicates a connected device.
• Latest Number – shows the latest known Number for a device.
The columns order can be changed and the application will keep the changes.
Table 2. Upgrade status symbols
NOTE: A software upgrade should be done on one device to start with. If successful,
the remaining devices can be updated in one operation.
• IP address - shows the IP address of the latest logged in device (e.g VoWiFi
handset).
• Serial number - shows the serial number of the latest logged in device.
Numbers Tab
The Numbers tab shows all Numbers configured at the site in a detailed list. Following
columns are displayed:
• Description – optional information of a Number that can be added by the Device
Manager user. For example, the user of the number.
• Number – the unique identifier of the Number. The identifier is unique for that device
type.
• Device type – the device model the Number is intended for
• Parameter version – shows the version of the parameters in the Number
• Device ID – the unique identifier of the device that the Number is associated to
• Online – shows if the device the Number is associated to is online. The symbol
indicates an online device
• Status – shows the parameter synchronization status. A Number can also be
queued for synchronization. Several different indications are used, for example
Synchronizing, Sync queued, Save queued, Synchronized, etc.

When the Number is offline, the database status is shown; Synchronized or Not
synched.
– software upgrade in progress.
It is also possible to see a progress bar when the device is being upgraded.
– software upgrade Pending, Request sent, or Accepted (a green arrow).
– software upgrade Scheduled or Retrying.
– the last upgrade Failed or Aborted (a red broken arrow).
– “Completed”, no symbol is shown