Specifications

TD 92442EN
04 October 2013 / Ver. PB1
Installation and Operation Manual
OpenStage WL3 Wireless Service
35
6. Device Manager
6.1.2 How to use the Device Manager
The following list is a short description to give a basic understanding on how to use the
Device Manager with devices. It is not intended to be used as a work flow description.
• Import a parameter definition file of the corresponding device type to Device
Manager.
• Create a template from the parameter definition file.
• Add a device to the Device Manager.
• Create a new Number for the corresponding device type.
• Upgrade the software of a device
• Associate the Number with the device.
Refer to applicable manual for a description of the work flow.
6.1.3 Device Manager GUI
The Device Manager window has a menu bar, a toolbar and a work area. The toolbar
has different tabs and when a tab is selected the available device types will be shown
in the left hand pane of the work area. The right pane shows devices, numbers,
templates, or licenses already configured.
Figure 10. Device Manager Window
The upper part of the work area has search fields with different search criterias for each
tab.
Sort and Filter the Lists
By default, the lists are sorted as follows:
• Devices tab – sorted by Device ID
Importing Different types of files can be imported. Note that if a
software file should be imported, it may have been
delivered in a package file.
Associate Before being able to synchronize parameters between the
WSG and devices, it is necessary to associate a Number
with the device. Association includes all parameters. If it
exists on that device type, it also includes Contacts.
Assign It is possible to assign a Number to a device that has not
yet been assigned a Number in the Device Manager.
Assign includes only the parameters defining the Number.