Specifications

TD 92442EN
04 October 2013 / Ver. PB1
Installation and Operation Manual
OpenStage WL3 Wireless Service
34
6. Device Manager
6. Device Manager
NOTE: Make sure that the Device Manager is configured to communicate with the
interface (for example WLAN) the devices are connected to. If not, the devices
will not appear in the Device Manager. See
7.1 Device Management Setup on
page 64.
The Device Manager can manage large sets of devices and contains a solution for:
• Centralized software upgrade on a set of devices and configuration of devices
• Central database storage for all device settings
• Upgrade of license for handset
In the Device Manager, much of the work is done with Devices, Numbers and
Templates.
6.1 Description
This section gives a description of the Device Manager application in the WSG and
how it is intended to be used.
6.1.1 Device Manager terminology
This section gives a brief description of the basic terminology in the Device Manager.
Device A handset that can be connected to the module.
Number The complete settings for a single device.
Template General settings for a specific device type. A template can
be applied to several Numbers of the same device type.
License Licensed functionality for a device.
Tabs In the Device Manager there are different views, or tabs. In
these tabs, the information for devices, Numbers,
templates and licenses are shown.
Parameter definition file A file including all possible settings for a certain device
type. Templates are created from parameter definition
files.
Software The software used in devices. The device software can be
updated via the module.
Version Parameter definition files and device software are
indicated by versions.
Package file A file that can contain other files, such as parameter
definition files, software files and template files.