Specifications

TD 92442EN
04 October 2013 / Ver. PB1
Installation and Operation Manual
OpenStage WL3 Wireless Service
30
5. Central Phonebook Configuration
11 In the Name Attribute(s) field, enter name(s) of the attribute(s) containing first
name and family name. If two attributes are used, enter the first name on the first
line and the family name on the second line.
5.5 Digit Manipulation in Central Phonebook
When importing telephone numbers it is sometimes necessary to automatically change
the way a number is written according to preset conditions.
Depending on where a number is situated, the module can alter the number that is
returned in a phonebook query. If, for example, the queried number is situated within
the same local exchange, the telephone number is considered to be an internal number
and the number is stripped from superfluous international prefixes, etc.
Telephone number standards
There are several standardized ways of writing telephone numbers.
The following formats are currently supported:
Examples
The following figure shows the elements of a telephone number, [phone] (in
canonical format), used in the parameter descriptions below.¨
Figure 8.
Example of how a telephone number is built up from different prefixes and
extensions.
Figure 9. Example of Digit Manipulation Settings
Format Comment
[phone] E.164 international standard, and E.123
[phone] E.123 local number
[phone] National prefix + national destination code in parentheses
[phone] National prefix in parentheses
[phone] Canonical address format
4631551234 Digits only. Conversion is controlled by setting maximum
lengths of internal and national numbers.
Country Code
581
National
Destination
Code
46 31 55 1234
Extension
PBX
Prefix