Specifications

TD 92442EN

04 October 2013 / Ver. PB1

Installation and Operation Manual

OpenStage WL3 Wireless Service

5. Central Phonebook Configuration

1 Click the LDAP settings link.

2In the LDAP Server or Proxy Address field, enter the IP address or DNS address

to the LDAP server.

3 In the Port Number field, enter the port number used by the LDAP server. If the

field is leaved empty, port 389 will be used for non-encrypted connection, and

port 636 will be used for encrypted connection (LDAP over SSL, called LDAPS).

4 In the LDAP Connection Security drop-down list, select if the connection to the

LDAP database is to be encrypted.

5 In the Authentication Method drop down list, select how to authenticate to the

LDAP server.

NOTE: If the authentication method SASL/DIGEST-MD5 is selected, the IP address for

primary DNS server must be entered in the DNS server field on the Network

setup page. Otherwise it is not possible to authenticate with the LDAP directory

Microsoft Active Directory 2003.

6 In the User name field, enter the user name used for logging on to the LDAP

server. It is a good idea to create a new user in the domain with access for the

LDAP server.

7 In the Password field, enter the password used for logging on to the LDAP

server.

8 In the Search Base DN field, enter the user entries' parent DN.

(The distinguished name for all users common entry.)

9 In the Number attribute field, enter the name of the attribute that holds the

telephone numbers.

10 In the Type of Name Attribute(s) drop down list, select the appropriate option.

The option depends on if the name is stored in a single attribute or if it is split into

two different attributes.