Specifications

TD 92442EN
04 October 2013 / Ver. PB1
Installation and Operation Manual
OpenStage WL3 Wireless Service
23
4. Basic Configuration
Set a Timeout to block the Fault log from repeated faults
1 Enter the timeout in minutes (0-1000 minutes), the default value is 10 minutes.
If no Status Logs should be blocked, set the timeout to 0.
2 Click “Set timeout” to save the setting.
An incoming fault will now be handled the first time it is received and then
blocked during the set timeout.
4.3.6 WLAN Handsets
Handset Administration gives you the possibility to list all handsets that are registered
in the system, search for a specific handset, or a range of handsets.This is intended to
facilitate troubleshooting.
The pages can be customized by changing the number of handsets shown on the
search result list.
Show all Registered VoWiFi Handsets
1 Select “Configuration” on the Start page.
2 Click “WLAN Portables” in the menu on the Configuration page.
3 Do one of the following:
• Click “Search” to search for registered VoWiFi handsets based on different
search criterias. For example Address/Number, IP address, Hardware ID
(often the MAC address) or the Status of the handset. The Search page
opens.
• Click “List all” to show all registered VoWiFi handsets.
4 The search result can be sorted by address/number, IP address, status or last
login. Click the name of the column to be sorted.