Specifications

TD 92442EN
04 October 2013 / Ver. PB1
Installation and Operation Manual
OpenStage WL3 Wireless Service
21
4. Basic Configuration
3 Click “Reset” button.
4.3.3 Level of Seriousness for different Fault Types (Module Fault List)
A module fault list exists which shows codes and statuses etc. for each module in the
system. The level of seriousness can be changed for different fault types in the logs.
1 Click “Configuration” on the Start page.
2 Select Other Settings > Advanced Configuration, in the menu on the
Configuration page.
3 Click the “Troubleshoot” button and select “Module Fault List” in the menu.
4 Select level of seriousness in the drop-down list for the code(s) for which you
want to change level.
4.3.4 Fault Log
The fault log is a centralized log file and shows a complete log of the faults in the
system. Every time a fault message is generated in the system, information about the
fault is written to the log file. The maximum number of entries in the log file is 1050.
When the log file is full, the 50 oldest entries are removed.
1 Click “Configuration” on the Start page.
2 Select Status > Fault Log in the menu on the Configuration page.
The first 25 log entries are shown. To get the following 25 log entries, click the
“Next” link.
The following fault levels exist in the log:
• Information
• Individual reset
•All OK
• Critical error
•Error
• Warning