Specifications

TD 92442EN
04 October 2013 / Ver. PB1
Installation and Operation Manual
OpenStage WL3 Wireless Service
19
4. Basic Configuration
4.1.4 Export the Central Phonebook to a CSV File
The complete Central phonebook can be exported to a CSV file for backup reasons.
The exported file will be saved with the character encoding UTF-8.
1 Click “Phonebook” on the start page.
2 Select Phonebook > Import/Export in the menu on the Configuration page.
3 Click “Export”.
4 Click “Save” in the window that opens.
5 Enter a name of the file, and select in which folder the file should be saved.
6 Click “Save”.
4.2 Create Messaging Groups
Messaging Groups in the WSG makes it possible to send one message to several
handsets. 30 groups with 15 handsets in each group, and one group with 50 handsets
can be created. Messaging Groups can also be used to send Push-to-talk (PTT)
messages to a group of handsets. In this case, PTT parameters must also be set in the
handset that shall initiate the PTT message. Refer to the handset’s Configuration
Manual for more information about the parameters.
Each group is given an address, either a name or a number, and a description. Then
the addresses of the handsets, that should be included in the group, are added.
1 Click “Configuration” on the Start page.
2 Select Messaging Groups > Edit in the menu on the Configuration page.
3 Open the group to be configured by clicking on its name (default EMPTY).
4 Enter the following settings:
Setting Description
Group address: ID for the group, can be a name
a
or a number