Specifications

TD 92442EN
04 October 2013 / Ver. PB1
Installation and Operation Manual
OpenStage WL3 Wireless Service
15
3. General
5 Click “Import file”. The file is imported to the module.
6 Click “Close”.
When starting, there may be a warning about the security certificate. This warning can
be ignored.
Create certificate
It is possible to create certificates in the module. For instructions on how to create a
PKCS#12 file, follow this instruction:
1 Click “Configuration” on the start page.
2 Select Other Settings > Advanced Configuration in the menu in the on the
Configuration page.
3 Click “Create” under Certificates in the menu.
4 Enter valid parameters for your certificate file in the Create Self Signed
Certificate
window. “Validity” and “Common name” are mandatory.
Due to security reasons, some characters in the ASCII-table are not allowed to
use

in the fields “Common Name”, “Organization Unit”, “Organization”, “Locality”,
“State or Province” and “Country” when creating a certificate.

Among these are: [, ], (, ), {, }, $, &, \, |, *, ", `, ', ?, ~, >, <, ^, \n, \r.
5 Click “Create Certificate”.
3.5 Proxy Settings
If your corporate network is using a proxy server, the WSG must send all outgoing
requests through the proxy server to be able to send the requests outside the corporate
network.
1 Click “Configuration” on the start page.
2 Select Other Settings > Advanced Configuration.
3 Select “Proxy” under Security in the menu on the Advanced Configuration page.