Specifications

TD 92442EN
04 October 2013 / Ver. PB1
Installation and Operation Manual
OpenStage WL3 Wireless Service
14
3. General
3.4.4 FTP Port
You can determine if it shall be possible to access the FTP area or not. The FTP area
can only be accessed when the FTP port is open.
1 Click “Configuration” on the start page.
2 Select Other Settings > Advanced Configuration.Select “IP Ports” under Security
in the menu on the
Advanced Configuration page.
3 Select if the FTP port shall be open (enabled) or not (disabled) in the FTP (TCP
Port 21)
drop-down list.
4 Click “Activate”.
3.4.5 Certificates
Certificates are used to increase security by encryption. A self-signed digital certificate
is created during the first start-up. This certificate is issued for the module’s MAC
address. A certificate can also be imported or created in the module.
Import certificates
Certificates can be imported to the WSG. These certificates may be created by a
system administrator with IT security responsibility. The WSG uses PKCS#12 files,
which include keys and certificates. Consult your IT responsible to obtain the PKCS#12
file.
1 Click “Configuration” on the start page.
2 Select Other Settings > Advanced Configuration in the menu in the on the
Configuration page.
3 Click “Import” under Certificates in the menu.
4 In the Certificates Import window, you can locate a certificate file. Enter file name
and a valid password. The certificate is tied to a specific password which should
be delivered with the file.