Specifications

TD 92442EN
04 October 2013 / Ver. PB1
Installation and Operation Manual
OpenStage WL3 Wireless Service
9
3. General
3.1.4 Advanced Configuration page
The Advanced Configuration page is reached from the Configuration page (under
Other Settings).
Figure 7. The Advanced Configuration Page
3.2 Authentication Levels and Default Password
The product has five different authentication levels:
• User rights are required for the administration of the phonebook. Default user name
and password are “user” and “password”.
• Administrator rights are required for the setup, the configuration and administration,
simple troubleshooting and changing passwords (except for the sysadmin
password). Default user name and password are “admin” and “changeme”.
• System Administrator rights is used for advanced troubleshooting. It gives access to
all administration pages and the permission to change all passwords. Default user
name and password are “sysadmin” and “setmeup”.
• Auditor rights gives basically the same access as Administrator rights, but without
permission to alter values. There is no access to the setup wizard or the Device
Manager. Default user name and password is “auditor” and “readonly”.
Different levels of password policy can be set in, see 3.3.2 Set Password Policy on
page 10.
Functionality matrix
The following matrix shows which functionality that can be used by the different
authentication levels.
anonymous user admin sysadmin audito
r