Specifications

TD 92442EN
04 October 2013 / Ver. PB1
Installation and Operation Manual
OpenStage WL3 Wireless Service
8
3. General
3.1.2 Login Page
When clicking an application that requires login credentials, the WSG redirects you to a
Login page. Once logged in, you will remain logged in until you are closing the web
browser or by clicking "Log out" in the WSG´s web interface.
If you are logged in to an application and then navigating to another application
requiring a higher authentication level than the prior application, you will be prompted
to log in again.
For example; you log in to the Phonebook application as user, and then navigating to
the Setup Wizard. In this case, you will be prompted to log in again due to a higher
authentication level (admin or sysadmin) is required for that application.
Figure 5. Login page in the WSG
3.1.3 Configuration Page
Figure 6. The Configuration page
With system administrator or administrator rights you will be able to access the
complete configuration page from the Configuration- and Phonebook buttons on the
start page. Links to documentation are also found on the Configuration page.
Use the symbol if you want to return to the start page without logging out. Using the
“Log out” link will also send you back to the start page but you will be logged out as
well.
System information is shown on the Configuration top page, for example host name, IP
address and MAC Address.