Specifications

Use Handset to Verify the VoWiFi System Deployment
Range Beep
A31003-M2000-M100-1-76A9, 11/2012
OpenStage WL 3 / WL 3 Plus, Administration Manual 7-3
1. There are two options to access the Site Survey Tool menu:
• If the handset has been factory reset or not configured; in idle mode, enter
“40022“, select “Site survey tool“.
• If the handset has been configured; in idle mode, enter “*#77#”.
2. Select “Range beep level”.
3. Enter the new RSSI threshold and press “OK”.
7.3.2 Range Beep on a Configurable RSSI Threshold
A beep is played when the signal goes below the selected threshold.
1. There are two options to access the Site Survey Tool menu:
• If the handset has been factory reset or not configured; in idle mode, enter
“40022“, select “Site survey tool“.
• If the handset has been configured; in idle mode, enter “*#77#”.
2. Select “Range beep“.
3. Select one of the following:
• On - Activates the range beeps
• Off - Deactivates the range beeps